Correctly adjusting the angle and depth of cut on your vertical sawmill is critical to ensuring that your workpiece is cut accurately and safely. Below is a detailed guide on how to make these adjustments correctly:

Adjusting the cutting angle:

1.Understanding the impact of the cutting angle:

The cutting angle affects the shape and size of the workpiece to be cut. Different angles are suitable for different cutting tasks, so it is important to specify the required cutting angle before making any adjustments.

2.Preparation:

Before adjusting the cutting angle, make sure that the vertical sawing machine is stopped and that the saw blade has completely stopped rotating. Wear the necessary personal protective equipment, such as safety glasses and gloves.

3.UNLOCK ADJUSTMENT MECHANISM:

Locate the cutting angle adjustment handles or knobs on the vertical sawmill. Typically, these handles are located on the side or rear of the sawmill. Unlock the adjustment mechanism so that you can freely adjust the cutting angle.

4.To adjust the angle:

Turn the handle or knob until the desired cutting angle is reached. A dial or angle scale can be used during the adjustment process to ensure that the angle is accurate.

5.LOCK ADJUSTMENT MECHANISM:

Once the desired cutting angle has been reached, be sure to lock the adjustment mechanism to prevent accidental movement or change of angle during operation.

6.VERIFY THE ANGLE:

Before starting to cut, it is a good idea to verify that the set cutting angle is accurate by using an angle measuring tool. This can help ensure that the workpiece is cut to the desired shape and size.

Adjust the depth of cut:

1.Understanding the Importance of Depth of Cut:

Depth of cut determines how deep the saw blade cuts into the workpiece, which directly affects the speed and quality of the cut. The correct depth of cut improves efficiency and ensures accuracy of the cut.

2.Determine the required depth of cut:

Depending on the requirements of the workpiece and the material used, determine the required depth of cut. This can be determined by looking at the workpiece drawing or by operating experience.

3.LOCK DEPTH OF CUT ADJUSTMENT MECHANISM:

Locate the depth of cut adjustment handle or knob on the vertical saw and make sure it is unlocked for adjustment.

4.ADJUST DEPTH:

Turn the handle or knob gradually to move the saw blade down until the desired depth of cut is reached. During the adjustment process, refer to the scale or depth ruler on the saw to help accurately adjust the depth.

5.LOCK ADJUSTMENT MECHANISM:

Once the desired depth of cut has been reached, be sure to lock the adjustment mechanism to prevent accidental changes in depth during operation.

6.VERIFY DEPTH:

Before starting to cut, it is a good idea to verify that the depth of cut set is accurate by using a depth measuring tool. This can help ensure that the workpiece is being cut to the desired depth to meet design requirements.

Adjusting the angle and depth of cut on a vertical sawmill requires care and precision. Following these steps and being safe will ensure that the cutting process is efficient, accurate and safe.

Translated with DeepL.com (free version)