Sw-3015A2 / 2515A2
Sw-3015A2 / 2515A2
products and technology
Professional focus: professional research and development, production, manufacturing precision high-speed planer milling machine and vertical sawing machine (metal), focusing on specific areas, skilled.
Reliable source of technology: technology and major spare parts from Taiwan, to ensure the high quality and high performance of the product.
Leading quality: mechanical precision inspection to international inspection standards (ISO 8636 - 1:2000), quality in the world's leading level, recognized by the majority of customers.
Key words:
Sw-3015A2 / 2515A2
Classification:
Product Description
1. Special design, small pressure difference, energy saving and electricity saving 2. Thickened red copper pipe is adopted to prevent copper pipe leakage caused by corrosion of copper pipe and has longer service life 3. High performance heat exchanger 4 is adopted to increase the design margin of the whole machine by 20% to ensure stable operation of the unit under severe working conditions 5. Antirust paint is applied to the cylinder to prevent rust inside the machine 6. high quality parts 7, air-water separator and multiple drainage design are adopted, the drainage is more timely and thorough to avoid the problem of poor dew point quality caused by residual moisture. 8. The whole series is equipped with high and low pressure protection devices to effectively protect the life of the compressor and reduce the maintenance cost.
|
Remarks | |
1. | Right End Mill Head: 12.5HP x 1(made in Taiwan) | 6〞cutter head x 1 |
2. | X and Y axes with ball screw made in Taiwan |
|
3. | Driving system with variable frequency motor and gearbox made in |
|
4. | The electricity control system of the machine is assembled by the imported original components. (Consists of PLC, frequency converter made by Mitsubishi and imported original switches) |
|
5. | Lubrication is fed automatically in a forced way to each sliding rail surface. X-axis is lubricated by immerging the ball screw in the oil tank. Oil is supplied to Y and Z axes in an autoweighing way before working in replacement. |
|
6. | The sliding rail surface of the working bench is pasted with super abrasion-resistant plates to reduce abrasion resistance. |
|
7. | Assembled optical scale is applied to X, Y and Z axes respectively. |
|
8. | Bed Table (X axis) adopts steel dust cap. |
|
9. | Cross rail (Y axis) adopts organ-type protective cover. |
|
10. | The heat treatment. |
|
Other Products
Consulting Products
Add: Nanhai District, Foshan City, Guangdong Province, Lishui Town, Liguan Road, Ma Shi Management District Chief Tan Ji
Telephone:(0757) 85664576 / (0757)85688576
Fax:(0757)85683576
Contact: Mr. Huang13802637353/Miss Chen13928603677
Micro signal: Miss Feng13928645191
Company Website:http://www.sw-roc.com
E-mail:sw@sw-roc.com